Finish work / Floor repair
Not every floor needs replacing. Often the trouble is a handful of pieces: a tile that cracked when a cast iron pan fell, a plank with a deep gouge from moving day, a threshold that rocks every time someone steps on it. Floor repair is about fixing those spots cleanly so the room looks whole again.
The key to a good repair is a matching piece. If you kept spare tiles or planks from the original install, the repair is straightforward. If not, we help you find the closest match and decide where a slight difference will be least visible.
How the work goes
Look and match
We look at the damage, check how the floor was installed and confirm you have, or can get, a matching piece.
Remove the damaged piece
Tile is cut out along the grout lines without disturbing its neighbors. Planks are either unclicked from the nearest wall or cut out and replaced in place.
Set the new piece
The new tile goes into fresh thinset and is grouted to match. A new plank is fitted and glued so it sits level with the rest.
Blend and clean
We check the height and the joints, clean off any haze and leave the floor ready to walk on.
Common repairs we see
Cracked tiles near the kitchen island and in entries, where heavy things get dropped. Hollow sounding tiles that have lost contact with the thinset. Vinyl planks with gouges from furniture legs. Laminate seams that peaked because the floor was trimmed too tight at the wall. Thresholds that came loose between a tile entry and a plank hallway.
Each of these has a clean fix when it is caught early. A hollow tile, for example, is easier to reset before it cracks.
Repair or replace?
If the damage is in a few spots and the floor is otherwise sound, repair almost always makes sense. If many tiles sound hollow across a room or a floating floor has buckled in several places, the cause is usually under the floor, and a new floor over a properly prepared base is the honest recommendation. We will tell you which we see at the visit.
When a repair would leave a visible color difference, we suggest a place to take the spare pieces from, such as a closet floor or the area under an appliance, so the patch goes there instead.
Keep spares
After any new floor, keep a box of spare tiles or planks in a dry, indoor spot. Note the product name and color on the box. It turns a future repair into an easy afternoon.
Questions about floor repair
Can you replace one tile without damaging the rest?
Yes. We cut out the grout around it and remove the tile in pieces, which keeps the neighbors safe. A matching spare is the main thing we need.
Can you fix a squeaky floor?
If a floating floor squeaks because of the surface or the underlayment, often yes. Squeaks that come from below the subfloor are a different kind of work, and we will say so at the visit.
What if we have no spare pieces?
We help you find the closest match. When the original is no longer made, we plan the patch in a spot where a small difference is hard to see.
Do you repair hardwood?
Our repair work focuses on tile, vinyl plank and laminate, plus thresholds and trim. Tell us what you have and we will be clear about what we can do.
